M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus
6.13.4 File Operation Screen
6.13.4.1 Outline
This displays a list of PLC data stored in the current project as well as creates and deletes new PLC data and changes the
name of this data.
6.13.4.2 Screen Display Items
The following table describes the screen display items for the file operation screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
List
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the PLC data stored in the current project.
This displays nothing if there is nothing stored.
357
IB-1501614-B