M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.18 Parameter Menus
6.18.4 Multiple Project Parameters Main Screen
6.18.4.1 Outline
This configures parameters for multiple projects.
6.18.4.2 Screen Display Items
The following table describes the screen display items on the multiple project main screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
6.18.4.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the multiple project parameters main screen are always enabled.
6.18.4.4 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
This is displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This transitions to the parameter main screen.
This displays the specified screen.
565
Operation
IB-1501614-B