Development Procedure Using Gx Works2; Development Using Text Editor; Inputting Messages Directly From Gx Works2 - Mitsubishi Electric M800VW Series Manual

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

5 Peripheral Development Environment (GX Works2)

5.8 PLC Message Development

5.8.6 Development Procedure Using GX Works2

There are two types of development procedure using GX Works2 as follows.

 Converting into GX Works2 data using a generally available text editor and spreadsheet.

(When managing the large amount of message data using a commercial tool)

 Input messages directly on GX Works2.

(When adding and correcting the small amount of message data)

Device comment

for this CNC

(1) In GX Works2, only CSV files can be read. Unlike GX Developer, TXT files cannot be read. CSV files of GX Works2 proj-

ects with label settings cannot be read. Thus, PLC message can only be developed by inputting messages directly from

Create message data using a generally available text editor. The written format and how message data are described fol-

(2) Transfer

In GX Works2, message data is treated as line statements of sequence programs, and can be edited. Like sequence pro-

grams, message data is transferred from GX Works2 to the CNC controller.

Describe message data directly on GX Works2. In GX Works2, message data is treated as line statements of sequence

programs. The written format and how message data are described follow.

(2) Transfer

Like sequence programs, message data is transferred from GX Works2 to the CNC controller.

IB-1501614-B

Transfer (edit)

Sequence programs

for this CNC

CNC controller