Enabled/Disabled State Of Menu Keys; Status During Screen Displays; Operation Of Key Presses - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.18 Parameter Menus

6.18.5.3 Enabled/Disabled State of Menu Keys

The menu keys displayed on the project settings screen are always enabled.

6.18.5.4 Status during Screen Displays

The following table describes the status when displaying the project settings screen.
Item name
Maximum project No.
List

6.18.5.5 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Maximum project No.
List
Settings
Close
This is the default focus position when the screen is displayed.
This displays the highest project number that can be used within
the project numbers set in the NC.
This displays the project ratio, execution project, and execution se-
quence set for each project.
Refer to "6.18.5.10 Closing the Project Settings Screen".
This sets the focus to the maximum project No.
This changes the maximum project no. selection when the focus is already set.
This selects the list.
Refer to "6.18.5.9 Configuring the Project Settings".
Refer to "6.18.5.10 Closing the Project Settings Screen".
567
Operation
Operation
IB-1501614-B