Closing The Check Program Popup Screen; Split Screen; Entry Device Monitor - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.15 Ladder Menus

6.15.8.7 Closing the Check Program Popup Screen

Use any of the following methods to close the check program popup screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.

6.15.9 Split Screen

This splits the ladder screen and displays both the entry device monitor and the entry ladder monitor screens.
The entry device monitor and the entry ladder monitor screens cannot be displayed simultaneously.
This screen cannot be used when the operation mode is GX Works 2.

6.15.9.1 Entry Device Monitor

Outline
This splits the ladder screen (monitor) and enables the entry ladder monitor together with the ladder monitor display.
The display of menu keys changes depending on whether the ladder screen or the entry device monitor is selected.
[Selecting the ladder screen]
IB-1501614-B 480