M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Screen display items
The following table describes the screen display items on the trace point setup screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Specified devices
Enabled/disabled state of menu keys
The following table describes the conditions upon which menu keys displayed on the trace point setup screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Bit device setup
Word device setup
Device setup condi.
Select data
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the specified device and device setup conditions when the trace point is "SPEC-
IFIED DEVICES".
Condition upon which it is enabled/disabled
Enabled when the trace point is "SPECIFIED DEVICES".
Enabled when the trace point is "SPECIFIED DEVICES".
Enabled when the trace point is "SPECIFIED DEVICES".
Enabled when the trace point is "SSPECIFIED DEVICES", and the focus is at the "SPECIFIED
DEVICES".
Display state
525
IB-1501614-B