Ladder Display Settings Screen; Outline; Screen Display Items - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus

6.16.3 Ladder Display Settings Screen

6.16.3.1 Outline

This configures settings for the ladder screen. These settings are common between different projects.

6.16.3.2 Screen Display Items

The following table describes the screen display items for the ladder display settings screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Maximum number of contacts
Zoom display
Monitor value display
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
This is displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the [21 CONTACTS], [17 CONTACTS], [13 CONTACTS],
[11 CONTACTS], and [9 CONTACTS] options.
This displays the [REDUCTION], [STANDARD], and [EXPANSION] op-
tions.
This displays the [YES] and [NO] options.
499 IB-1501614-B