M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.9 Creating Device Comment
5.9.2 Writing Method of Indirect Input
This section describes how to describe when creating using tools like spreadsheets. The following example is a device
comment written with a spreadsheet.
Column
Column for
for device
comment
Data format of col-
umns
Device
Input of device is mandatory.
Conversion cannot be done without device. Always describe a device.
Device is a required item. Describe it in one-byte code.
Comment
Describe comment
If device in the same row is blank or incorrect, comment is not registered.
Up to 32 one-byte characters can be described.
Note
(1) Device names cannot be set on GX Works2.
Save the above data in the Unicode format, and change the extension to ".csv".
The following example displays the above data with a text editor.
Comment
Device Name
Comment
M0 0
M1 1
M2 2
M3 3
IB-1501614-B
The first two rows are for Header. Enter
"Comment" and the data format of the column in
the table below in the language selected.
Input device and comment in the same row.
Description
192