Progress Screen - Mitsubishi Electric M800VW Series Manual

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

6 Explanation of Built-in Editing Function (PLC On-board)

6.14 External File Operation Menus

6.14.10 Progress Screen

Progress screen when reading/writing a project from/to CNC differs depending on operation mode.

The following progress screen is displayed for GX Works2 mode.

(*1) Regardless of the check box ON/OFF, progress screen closes automatically after processing ends.

(*2) When the [Cancel] button is pressed, processing stops after displaying a message.

When operating "EXT. -> NC", the following message is displayed when processing stops after project data in CNC is

Refer to "Abnormal operation" in "6.14.2.6 Reading External Project Data and Storing in the NC" for details of mes-

Failed to write to the NC. The project data in the NC has been deleted. Fix the following and try again:

 A ladder instruction not specified by this product is included.

 The memory capacity is insufficient.

IB-1501614-B