Mitsubishi Electric M800VW Series Manual page 551

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Status during screen displays
The following table describes the status when the trace point setup screen is displayed.
Item name
Trace point setup
Specified devices
Operation of key presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
Trace point setup
Bit device setup
Word device setup
Device setup condi.
Setting
Select data
Close
IB-1501614-B
This selects "EACH MAIN SCAN".
This is left blank with entry disabled state.
Refer to "Closing the trigger point setup screen".
The focus is applied to the trace point setup.
This changes the trace point setup selection when the focus is already applied.
The focus is applied to the bit device field.
The cursor is displayed at the beginning of the bit device list.
The focus is applied to the word device field.
The cursor is displayed at the beginning of the word device list.
The focus is applied to the device setup condi. field.
This changes the device setup condi. selection when the focus is already applied.
Refer to "Trace point setup".
Cursor position
Bit device
("BIT DEVICE" column)
Bit device
("CONDI." column)
Word device
("WORD DEVICE" column)
Word device
("VALUE" column)
Word device
("MASK(HEX)" column)
Word device
("CONDI./FORMAT" column)
Device setup condi.
Refer to "Closing the trigger point setup screen".
Operation
Operation
This displays the device entry field.
This changes the condition selection.
This displays the device entry field.
This displays the value entry field.
This displays the mask entry field.
This changes the selection.
This changes the selection.
526