Create Csv File Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus

6.17.4.8 Create CSV File Screen

Outline
This is used to save the trace execution results in CSV file format.
Screen display items
The following table describes the screen display items on the create CSV file screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Storage setting
Device storage method
Storing method of a value
Enabled/disabled state of menu keys
The menu keys displayed on the create CSV file screen are always enabled.
Status during screen displays
The following table describes the status when the create CSV file screen is displayed.
Item name
Storage setting (path)
Storage setting (file name)
Device storage method
Storing method of a value
IB-1501614-B
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the path and file name where the CSV file is being stored.
This displays the storage method of the device being stored.
This displays the storage method of the device values being stored.
This is blank or displays the path that is specified in the storage setting.
This is blank or displays the file name that is specified in the storage setting.
This selects "HORIZONTALLY ARRANGE".
This selects "NOT SURROUNDS BY [ ]".
Display state
Operation
544