M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.10 Creating Label
Local label for function block
Data format of col-
umns
Class
Describe the class name of label.
Conversion cannot be done without class name. Always describe a device.
Types of class are described later.
Label name
Describe label name.
Conversion cannot be done without label name. Always describe a device.
Up to 32 one-byte characters can be described.
Actual device names and reserved characters cannot be used.
Data type
Describe the data type of label.
Conversion cannot be done without data type. Always describe a device.
Data types are described later.
Constant
Describe the numeric value assigned to the label when the class is "VAR_CONSTANT".
Device
Cannot be set for local label.
Comment
Describe comment of label.
Up to 1024 one-byte characters can be described.
Save the above data in the Unicode format, and change the extension to ".csv".
For details on function blocks (FB), refer to "5.11 Creating Function Block", "GX Works2 Operating Manual (Simple Project,
Function Block)" and "GX Works2 Operating Manual (Structured Project)".
IB-1501614-B
The first two rows are for
Header. Input "Label" and the
column data format in the
table below in an appropriate
language.
Input class, label name and
other information in the
same row.
Description
200