Mitsubishi Electric M800VW Series Manual page 580

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Screen display items
The following table describes the screen display items on the trace file delete screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Path
Project name
Title
List
File name
Title
Enabled/disabled state of menu keys
The following table describes the conditions upon which menu keys displayed on the trace file delete screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Execute
Status during screen displays
The following table describes the status when the trace file delete screen is displayed.
Item name
Path
Project name
List
File name
Title
Operation of key presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key
List
Execute
Select external project
Close
Abnormal operation
This information describes the details of error messages displayed on the trace file delete screen and the corrective action
thereof.
Error message
The NC cannot execute during trace. Ex-
ecute again after trace is completed.
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the path where the project data is stored.
This displays the name of the specified project data.
This displays the title set in the specified project data.
This displays the trace file stored in the specified project.
This displays the selected file name.
This displays the title set in the selected file.
Condition upon which it is enabled/disabled
Enabled when the file name is not blank.
This displays the default path or the path of the selected project name.
This is blank or displays the selected project name.
This is blank or displays the trace files stored in the selected project.
This is blank or displays the file name that is selected in the list.
This is blank or displays the title that is set in the selected file in the list.
Refer to "Closing the trace file delete screen".
This selects the list.
This reads the specified trace file.
This displays the select external project popup screen.
Refer to "6.14.3 Select External Project Popup Screen".
Refer to "Closing the trace file delete screen".
Error details
This is displayed when executing an oper-
ation during trace.
Display state
Operation
Operation
Execute the operation during trace stop.
555
Remedy
IB-1501614-B