Operation On Write Error - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.8 PLC Message Development

5.8.10.3 Operation on Write Error

When a conversion error is generated, the following dialog is displayed on the GX Works2 screen.
If the message file resulting in a conversion error is selected with the [File Selection] tab on the "Read from PLC" screen, the
file name and title will change and be displayed as shown below.
If this message files are read to GX Works2, they are stored with file name of ERRMS-00. ("ERRMS-XX": XX is an error file
number added from 0 in hexadecimal.)
ERRMS-00 <-- M01 MSG : Convert ERROR.
(1)
(1) File name at error + error number (hexadecimal)
(2) Title statement including transferred original file name
CAUTION
Do not read and use on GX Works2 message files for which a conversion error is generated. Unintended data are
included, and malfunction may result.
IB-1501614-B
(2)
188