Enabled/Disabled State Of Menu Keys; Operation Of Key Presses - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus

6.13.1.3 Enabled/Disabled State of Menu Keys

The following information describes the conditions upon which menu keys displayed on the NC file operation screen are
enabled/disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
ROM WRITE
FILE OPE.
FORMAT
PLC RUN/STOP
PASSWORD CANCEL.
PLC VERSION UP

6.13.1.4 Operation of Key Presses

The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
IB-1501614-B
Condition upon which it is enabled/disabled
Disabled when the function is restricted.
Disabled at the following:
 When function is limited
 When operation mode is GX Works2
Disabled when the function is restricted.
Disabled when the function is restricted.
Disabled when the function is restricted.
Disabled at the following:
 When function is limited
 When operation mode is GX Works2
These transition to the main menu.
This displays the specified screen.
Operation
348