M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.5 Common Items
5.5.12 Checking Data Size
Data such as sequence program and comment files can be checked whether its amount is within the allowable range to be
written to the CNC by using memory capacity calculation function of GX Works2.
5.5.12.1 Operating Procedures
(1) Start the operation screen by the following operation on GX Works2.
[Tool] -> [Confirm Memory Size]
Select the data you want to write on the following screen and click [Execute].
To select program or parameter, select "Program Memory/Device Memory" for [Target Memory].
To select comment file or source information, select "Memory card (SRAM)" for [Target Memory].
IB-1501614-B
120