M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
6.14.5 Save External Project Popup Screen
6.14.5.1 Outline
This displays a list of project data stored in external devices, selects the project data to be saved, and also creates new data.
Projects that match the project operation mode are listed. For operation mode, refer to "6.1.3 Operation Mode of Project".
Only projects with one file format can be listed and selected for GX Works2 projects.
6.14.5.2 Screen Display Items
The following table describes the screen display items for the save external project popup screen.
Item name
List
Path
Project name
Title
6.14.5.3 Enabled/Disabled State of Menu Keys
The menu key displayed on the save external project popup screen are always enabled.
This displays the directory and PLC data stored at the specified path.
This displays the path where the project data is stored. (the path can be entered)
This displays the name of the project data selected in the list. (the project name can be
entered)
This displays the title set in the project data selected in the list. (the title can also be en-
tered)
Display state
417
IB-1501614-B