Closing The Select External Project Popup Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
Abnormal operation
This information describes the details of error messages displayed on the select project popup screen and the corrective
action thereof.
Error message
The specified project does not exist.
Specify an existing project path/project
name.

6.14.3.8 Closing the Select External Project Popup Screen

Use any of the following methods to close the select external project popup screen.
Methods to close the screen
Select the project and then press the [SELECT] menu key.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Error details
This is displayed when the [SELECT]
menu key is pressed after entering a
path or project name that does not exist.
411
Remedy
Enter the correct path and project name
and then press the [SELECT] menu key
again.
IB-1501614-B