Closing The Save External Project Popup Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.14 External File Operation Menus
Abnormal operation
This information describes the details of error messages displayed on the save external project popup screen and the
corrective action thereof.
Error message
This project/data name is a reserved device
name. Please choose another name.
Prohibited characters were used in the file
name.
Do not use the following characters in file
names:
/, :, ,, ;, *, ?, \, ", <, >, |
File name includes the multi-byte character
code. Please confirm file name.
Illegal characters have been used for a data
name. Use legal characters.
(*1) Refer to "6.6.1 PLC Data Used by the PLC On-board".

6.14.5.8 Closing the Save External Project Popup Screen

Use any of the following methods to close the save external project popup screen.
Methods to close the screen
Save the project data to the external device.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
Error details
This is displayed after the [SELECT] menu key
is pressed when a reserved device name (*1)
has been entered as the data name.
This is displayed when the [SELECT] menu key
is pressed and the data name contains prohib-
ited characters (*1).
This is displayed when the [SELECT] menu key
is pressed and the data name contains double-
byte characters.
This is displayed when the [SELECT] menu key
is pressed and the final character of the data
name is a period.
421
Remedy
Enter a suitable data name before pressing the
[SELECT] menu key.
Enter a suitable data name before pressing the
[SELECT] menu key.
Enter a suitable data name before pressing the
[SELECT] menu key.
Enter a suitable data name before pressing the
[SELECT] menu key.
IB-1501614-B