M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.10 Creating Label
5.10.2 Development Procedure
There are two types of standard procedure for developing labels.
Indirect input
This is a method to transform for GX Works2 using a generally available text editor and spreadsheet as well as a data
conversion package. Used when the amount of setting labels is large and managed with commercial tools.
Windows PC
Set labels
for this CNC
zzzz.csv
Note
(1) Only CSV files can be read. Unlike GX Developer, TXT files cannot be read.
Direct input
This is the method to set labels directly on GX Works2. It is used when adding and correcting a small number of labels.
Create
Text editor
Spreadsheet
Edit
GX Works2
Sequence program
for this CNC
zzzz.WPG
197
CNC controller
IB-1501614-B