Mitsubishi Electric M800VW Series Manual page 298

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.2 Screen Configuration
[Copy/insert menus]
This menu contains the copy, paste, line insert, and line delete functions.
MARK
COPY
PASTE
INSERT LINE
DELETE LINE
CONVERT LADDER
UNDO
 [DEVICE] menu keys
This menu contains functions used to monitor desired devices.
DEVICE BATCH
ENTRY DEVICE
SAMPLING TRACE
BACK
 [PARAM.] menu keys
This menu contains functions used to configure operation of programs and multiple projects.
PROGRAM SETTING
COMMON POINTER SETTING
MULTI PROJECT PARAM.
BACK
 [ENVIRON. SETTING] menu keys
This menu contains functions used to configure the PLC On-board usage environment such as ladder screen settings and
locations to store device comments.
COMMENT DISPLAY
LADDER DISPLAY
CONNECT NC CHANGING
BACK
Ladder groups are selected by designating start points and end points.
This copies the ladder in the designated range.
This pastes copied circuits at the cursor position.
This inserts one blank line at the cursor position.
This deletes the line at the cursor position.
This converts edited circuits.
This returns the pre-converted ladder to the last previous state while editing.
This opens the device batch monitor screen.
This displays the entry device monitor screen.
This displays the sampling trace screen.
This returns to the main menu keys.
This displays the program setting screen.
This displays the common pointer setting screen.
This switches to the [MULTI PROJECT PARAM.] menu keys.
This returns to the main menu keys.
This displays the comment display screen.
This screen displays the ladder display screen.
This displays the connect NC change screen.
This returns to the main menu keys.
273 IB-1501614-B