M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.18 Parameter Menus
6.18 Parameter Menus
6.18.1 Parameter Main Screen
6.18.1.1 Outline
This displays menus for parameters that control PLC operation.
6.18.1.2 Screen Display Items
The following table describes the screen display items on the parameter main screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
6.18.1.3 Enabled/Disabled State of Menu Keys
The menu keys displayed on the parameter main screen are always enabled.
6.18.1.4 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
This is displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
These transition to the main menu.
This displays the specified screen.
559
Operation
IB-1501614-B