M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
6.17.3.6 Entering Devices for Monitoring
Use the following procedure to enter devices for monitoring.
(1) Press the [LIST] menu key to select the list.
(2) Use the up/down arrow keys, Page Up key, and Page Down key to move to the desired position in the device display col-
umn in the list.
(3) Press the [INPUT] key to display the device entry field at the bottom of the list and move the focus.
(4) Enter the device you want to monitor and then press the [INPUT] key. Press the [INPUT] key to close the device entry
field. The entered device displays at the cursor position in the list.
6.17.3.7 Deleting Devices
Single deletions (1)
(1) Use the up/down arrow keys, Page Up key, and Page Down key to move to the position where the device you want to
delete is displayed in the device display column in the list.
(2) Press the [DELETE] key. Press the [DELETE] key. The device at the cursor position will be deleted by pressing the
[DELETE] key. The project No. display in the same line is also removed.
Single deletions (2)
(1) Use the up/down arrow keys, Page Up key, and Page Down key to move to the position where the device you want to
delete is displayed in the device display column in the list.
(2) Press the [DELETE LINE] menu key. Pressing the [DELETE LINE] menu key deletes the line at the cursor position in the
list and moves the remaining lines below the cursor position up one line.
Delete all devices
(1) Press the [DELETE ALL DEVICES] menu key. Pressing the [DELETE ALL DEVICES] menu key displays the following
message screen.
(2) Pressing the [YES] menu key closes the message screen and all devices registered in the list are deleted. The project
No. display in the same line as the device is also deleted.
Pressing the [NO] menu key closes the message screen and returns to the entry device monitor screen.
513
IB-1501614-B