Language - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.1 Outline

6.1.4 Language

Programming language is as follows:
The following describes whether to display a project in CNC with PLC on-board.
Refer to MELSEC PLC development tool (GX Developer) specifications manual for M800/M80 Series or "5 Peripheral
Development Environment (GX Works2)" for a programming language that the CNC can operate.
GX Developer project and GX Works2 simple project without labels
The following table describes the programming language supported by GX Developer project and GX Works2 simple project
without labels.
Language
Ladder Display
SFC Not display
GX Works2 simple project with labels
The following table describes the programming language supported by GX Works2 simple project without labels.
Language
Ladder Display
ST Display
SFC Not display
GX Works2 structured project
The following table describes the programming language supported by GX Works2 structured project.
Language
Ladder Display
ST Display
SFC Not display
Structured ladder/FBD Display
Function
File List/POU List
Display
Not display
Function
File List/POU List
Display
Not display
Not display
Function
File List/POU List
Display
Not display
Not display
Not display
Monitor ladder/Find ladder
Monitor ladder/Find ladder
Monitor ladder/Find ladder
261 IB-1501614-B