Storage Setting Popup Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus

6.17.4.9 Storage Setting Popup Screen

Outline
This displays a list of the trace execution result files stored in the external devices. Selects or creates a file to be stored.
A project saved in GX Works2 format is not displayed in the list.
Screen display items
The following table describes the screen display items on the storage setting popup screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
List
Path
File name
Enabled/disabled state of menu keys
The menu keys displayed on the storage setting popup screen are always enabled.
Status during screen displays
The following table describes the status when the storage setting popup screen is displayed.
Item name
List
Path
File name
IB-1501614-B
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the directory and files of the specified path.
This displays the path where the CSV file is stored. (The path can be entered.)
This displays the file name selected in the list. (The file name can be entered.)
Refer to "Displaying CSV files".
This is blank or displays the path that is displayed in the List.
This is blank or displays the file name that is selected in the list.
Display state
Operation
546