Comment Display Settings Screen; Outline; Screen Display Items - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus

6.16.2 Comment Display Settings Screen

6.16.2.1 Outline

This configures settings for device comments stored in projects.

6.16.2.2 Screen Display Items

The following table describes the screen display items for the comment display settings screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
Comment line
Comment display
Statement display
Note display
Alias display(*1)
Alias display form(*1)
Common comment file
Select comment file
(*1) The settings of "Alias display" and "Alias display form" have no affect on the device comment in GX Works2 mode.
IB-1501614-B
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
This is displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
This displays the [4 LINE], [3 LINE], [2 LINE], and [1 LINE] options.
This displays the [YES] and [NO] options.
This displays the [REPLACE] and [PARALLEL] options.
This displays the [COMMENT (Common/Global)] and [Specify other
comment file]].
This displays the name of the device comment file stored in the current
project.
494