Mitsubishi Electric M800VW Series Manual page 303

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.3 Operation Key List
Configuring unique selection items
Only one data item is selected from two or more data items. The highlighted data is the currently selected item. There are two
methods used to change selections.
 Press the menu key with the same name as the item to move the selection data move in the right direction.
The selection will move to the left-most position when the currently selected item is at the right-most position.
Pressing the applicable menu key moves the selection as illustrated in the following diagram.
 After selecting an item with the Tab key, press the [ ← ] and [ → ] to move the selection.
If the currently selected item is at the right-most position, the selection moves to the left-most position. If the currently
selected item is at the left-most position, the selection moves to the right-most position.
The selection moves to the right as illustrated in the following figure when the [ → ] key is pressed.
The selection moves to the left as illustrated in the following figure when the [ ← ] key is pressed.
IB-1501614-B 278