Mitsubishi Electric M800VW Series Manual page 582

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Start of trace -> After displaying results
When you open the trace result display screen by trace start operations, the results of currently performed trace are
displayed. When a file is written in this state, the trace conditions and the results of currently performed trace are output in a
form of trace file (trace conditions and trace results).
The same applies to Start of trace -> End of trace -> After displaying results.
NC (On-board)
On-board trace files
End of trace -> After displaying results -> Trace condition change
Trace results for file write are discarded when you change the trace conditions.
When a file is written in this state, a message appears saying that only the trace conditions are written, and only the trace
conditions are written to a trace file.
Note that the previous trace conditions and trace results before change are displayed if the trace result screen is displayed.
NC (On-board)
On-board trace files
Result
display
Displays the previous trace conditions and trace
results before change
Trace file
(Trace conditions and
trace results)
With a message
Trace file
(Trace conditions only)
557
External device
GX Developer project
On-board trace files
External device
GX Developer project
On-board trace files
IB-1501614-B