Mitsubishi Electric M800VW Series Manual page 552

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
Entering specified devices
When the trace point is set to "specified devices", the specified device field becomes enabled.
How to enter the specified devices fields is as follows.
 Entering devices
(1) Press the menu key [BIT DEVICE SETUP] or [WORD DEVICE SETUP] to select the bit device setup or word device
setup.
(2) Use up, down, left or right arrow key to move to the arbitrary position of device column.
(3) Press the [INPUT] key to display the device entry field at the bottom of the list and move the focus.
(4) Enter the device you want to specify, and press the [INPUT] key. Then, the device entry field is closed, and the entered
device is displayed at the cursor position in the specified devices.
Device cannot be specified with label name.
 Deleting Devices
(1) Use up, down, left or right arrow key to move the cursor to the device position you want to delete in the device column.
(2) Press the [DELETE] key. The device at the cursor position will be deleted by pressing the [DELETE] key.
 Entering the condition for bit devices
(1) Press the menu key [BIT DEVICE SETUP] to select the bit device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position in the condition column.
(3) Press the [INPUT] key in the condition field based on "Setting selection items in lists" in "Operation key List: Screen Items
(Control)". The conditions will be displayed in order. (" ↑ " -> " ↓ " -> "ON" -> "OFF" -> " ↑ " -> ...)
 Entering the condition for word devices
(1) Press the menu key [WORD DEVICE SETUP] to select the word device setup.
(2) Use up, down, left or right arrow key to move the cursor to the arbitrary position in the condition column.
(3) Press the [INPUT] key in the condition field based on "Setting selection items in lists" in "Operation key List: Screen Items
(Control)". The conditions will be displayed in order. ("=" -> "<>" -> "<" -> ">" -> "<=" -> ">=" -> CHANGE -> "=" -> ...)
527 IB-1501614-B