M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.10 Creating Label
5.10 Creating Label
None of the label specifications are specific to Mitsubishi Electric CNC. For details on basic development procedure, refer to
"GX Works2 Operating Manual (Simple Project)" and "GX Works2 Operating Manual (Structured Project)". This section
outlines labels and describes development procedure, as well as the development procedure and input/output procedure
using general-purpose tool.
Note
(1) Labels can be used when simple project (with labels) or structured project is selected.
5.10.1 Overview of Label
Labels are character strings representing devices. Labels enables sequence programs to be created without thinking of
devices, and makes it easy to use sequence programs in different systems.
This section provides an example of sequence program when labels are used with ladder diagram.
IB-1501614-B
Replace devices with
character strings
196