Mitsubishi Electric M800VW Series Manual page 413

Plc development

Hide thumbs Also See for M800VW Series:

Table of Contents

M800V/M80V Series PLC Development Manual

6 Explanation of Built-in Editing Function (PLC On-board)

6.13 NC File Operation Menus

(6) After the PLC version update has been completed, the complete message is displayed. Press the OK button to automati-

cally close the PLC version up screen and return to the NC file operation screen.

If you update PLC version while the PLC is running, a message displays to confirm whether or not to pause the PLC.

Select [YES] to stop the PLC and continue updating the PLC version. If [NO] is selected, an error occurs since the PLC is

not stopped and the error message is displayed. (Refer to "Abnormal operation".)

If the PLC is stopped, a message displays to confirm whether or not to restart the PLC immediately before data has been

added. Select [YES] to continue running the PLC, or select [NO] to keep the PLC stopped.

IB-1501614-B