M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.11 Basic Operation
6.11.2.2 Editing the Sequence Program
The following diagrams illustrate the procedure to edit sequence programs.
To use only one project
Procedure
Start
Main
Display the ladder screen.
Main/ladder
Main/ladder
Main/ladder
Return to the main screen.
Main
Write the added sequence
program to ROM.
Main/NC file operation
ROM write
Complete
Operation
Screen position
Menu button
LADDER
EDIT
CONVERT LADDER
NC FILE
ROM WRITE
EXECUTE
317
Transition to the ladder screen.
Switch to the edit mode.
Create a program.
<Ladder sample>
M0
P4002 |-|/|------[INC D0]-|
Edited ladder data is confirmed by the
conversion operation.
Return to the main screen.
Transition to the NC file operation
screen.
The ROM write popup screen displays.
Execute the write operation.
IB-1501614-B