Deleting Passwords; Canceling Passwords; Closing The Cancel Password Popup Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.13 NC File Operation Menus

6.13.11.7 Deleting Passwords

Deleting entered passwords
(1) Use the up/down arrow keys, Page Up key, and Page Down key to move to the password display column for the desired
file.
(2) Press the [DELETE] key. Pressing the [DELETE] key deletes the password at the cursor position.
Locking the password for all data
(1) Press the [ALL DATA PWD. LOCK] menu key. Pressing the [ALL DATA PWD. LOCK] menu key displays the following
message screen.
(2) Pressing the [YES] menu key closes the message screen and resets all files to the password not set state (password
locked state). The cancel password popup screen closes and the PLC data stored in the NC is retrieved again.
Pressing the [NO] menu key closes the message screen and returns to the cancel password popup screen.
Locking the password for all data returns the block password to the password not entered state (password locked state).

6.13.11.8 Canceling Passwords

Normal operation
(1) Press the [EXECUTE] menu key. Pressing this key removes successfully cleared files from the list. Files that were not
successfully cleared remain displayed.
Files for which a password was not entered are also removed from the list as clearing the password for these files is no
longer needed.
Abnormal operation
This information describes the details of error messages displayed on the cancel password popup screen and the corrective
action thereof.
Error message
The entered password is not correct.
Enter correct password.

6.13.11.9 Closing the Cancel Password Popup Screen

Use any of the following methods to close the cancel password popup screen.
Methods to close the screen
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the soft keyboard.
Error details
This is displayed when the [EXECUTE]
menu key is pressed after entering an in-
correct password.
379
Remedy
The file for which an incorrect password
was entered is displayed again. Enter
the correct password and then press
the [EXECUTE] menu key again.
IB-1501614-B