M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.17 Device Menus
6.17 Device Menus
6.17.1 Device Main Screen
6.17.1.1 Outline
This screen contains menus used to monitor devices.
6.17.1.2 Screen Display Items
The following table describes the screen display items on the device main screen.
Item name
Connected NC name
Current project No.
Current project label
Alarm message
Left arrow key
Software keyboard
6.17.1.3 Enabled/Disabled State of Menu Keys
The following table describes the conditions upon which menu keys displayed on the device main screen are enabled/
disabled.
The menu keys which are not described in the following table are always enabled.
Menu name
Sampling trace
6.17.1.4 Operation of Key Presses
The following table describes the operation of each menu key and the keys on the NC keyboard when pressed.
Item name
Left arrow key/return menu key
Various menu keys
Display state
This displays the name of the connected NC.
This displays the current project number.
This displays the project label.
Alarm messages are displayed when alarms occur.
This is displayed when enabled.
This is displayed only when parameters are enabled.
Condition upon which it is enabled/disabled
Disabled when the function is restricted.
These transition to the main menu.
This displays the specified screen.
507
Operation
IB-1501614-B