M800V/M80V Series PLC Development Manual
5 Peripheral Development Environment (GX Works2)
5.14 Backing Up Sequence Programs and Other Data
5.14.2 Batch Backup of PLC-Related Data for Each Project
This section describes how to back up PLC-related data in batch for each project when the multi-project function is active.
5.14.2.1 Backup Target Data
The following data can be backed up.
Only the data of the project that is specified at backup is output.
Related data type
Sequence programs
(1)
Parameter
(2)
Sequence programs comment
(3)
Message
(4)
Multi-project setting parameters
(5)
(Device points settings only)
Symbolic information
(6)
Remark
Sequence programs code
Execution order setting information, etc.
GX Works2 comment data
Message data such as alarm messages, operator messages
and PLC switches in each language
Setting information for multi-project function
Device points setting information
Information on labels, FB, structures
239
IB-1501614-B