Changing The Nc Connection; Closing The Change Nc Connection Screen - Mitsubishi Electric M800VW Series Manual

M800V/M80V Series PLC Development Manual
6 Explanation of Built-in Editing Function (PLC On-board)
6.16 Environment Setting Menus

6.16.5.6 Changing the NC Connection

(1) Press the [AVAILABLE NCS] menu key to select the available NCs screen.
(2) Use the up/down arrow keys, Page Up key, and Page Down key to select the name of the NC connection.
(3) Pressing the [SWITCH NC] menu key closes the change NC connection screen and changes the NC connection.
The system transitions to the main screen when changing NC connections so as to read PLC data stored in the newly
connected NC.

6.16.5.7 Closing the Change NC Connection Screen

Use any of the following methods to close the change NC connection screen.
Methods to close the screen
Press the [SWITCH NC] menu key.
Press the [CLOSE] menu key.
Press the left arrow key.
Press the [ESC] key on the software keyboard.
IB-1501614-B 506