Setting Up The Channel Trace; Figure 2-45 Trace Setup Display - Agilent Technologies N1911A User Manual

2 General Power Meter Functions

Setting up the Channel Trace

This feature is only available when a P-Series or an E-Series E9320 power sensor is
N O T E
connected.
The Trace Setup is the only location where you can change the Y-axis units from
N O T E
Watts
Procedure
This procedure uses the Trace Setup under the Channel Setup menu. Alternatively, you can
N O T E
use a more visual method, when in the Graphical Trace Mode (Trace Control Menu), to set
the channel's Trace Control. (See
1 Press

Figure 2-45 Trace setup display

2 Use the
62
.
Trace Setup
,
keys to highlight the X Start field.
and
"Setting the Trace Display"
to display the Trace Setup menu.
N1911A/1912A P-Series Power Meters User's Guide
dBm
on page 118).
to