Setting Up Display; Turning On/Off Display; Setting Up Measurement Result Display; Selecting Items Displayed In Instrument Setup Display Area - Agilent Technologies 4288A Programming Manual

Setting Up Measurement Conditions and Display

Setting Up Display

Setting Up Display

Turning ON/OFF display

To turn ON/OFF display of the measurement parameter obtained, the measurement signal
level monitored, the handler output (comparator sorting result), the multi-compensation
settings, and the compensation data, use the following command.
:DISP on page 176
•

Setting up measurement result display

You can set up the following items related to the measurement result display.
❏ Number of display digits
❏ Fixed point display
• ON/OFF
• Value of highest digit
The following table shows the commands used to set up the above items.
Setup item
Number of display digits
Fixed point ON/OFF
display
Value of highest digit

Selecting items displayed in instrument setup display area

To select a display page for the part that displays the instrument setup at the right of the
display (instrument setup display area), use the following command.
• :DISP:TEXT2:PAGE on page 179
26
Command
:DISP:TEXT1:DIG on page 176
:DISP:TEXT1:FMSD on page 177
:DISP:TEXT1:FMSD:DATA on page 178
Chapter 3