Figure 2-20 Channel Setup Display - Agilent Technologies N1913a User Manual

2 General Power Meter Functions

Figure 2-20 Channel Setup display

When 8480 Series, N8480 Series, E-Series E4410, E-Series E9300 or U2000 Series sensor is
N O T E
connected, Sensor Mode is set to AVG only by default.
4 Press
5 Press
6 Select either
7 Press
56
. The Trigger menu is displayed.
Acqn
softkey to configure the trigger.
Sing Trig
Sing Trig
• is a single shot mode. After triggering, the measurement is
halted, and the
measurement by pressing the
Cont Trig
• is a continuous trigger mode. The symbol
displayed.
Settings
to configure the remaining trigger parameters. The trigger
Settings menu consists of two pages.
Figure 2- 22 shows page 2.
Cont Trig
or .
symbol is displayed. You can start another
Figure 2- 21
N1913/1914A EPM Series Power Meters User's Guide
key.
or
shows page 1 and
is