Step 5: Verify Operation Of The M9210A Module; Figure 4 - Agilent Connection Expert (Ace) - Agilent Technologies M9210A Startup Manual

M9210A Front Panel Features

Step 5: Verify Operation of the M9210A Module

The intention of this step is to verify correct operation of the newly installed module.
1. Run Agilent Connection Expert (from the desktop icon, or from Start > Programs > Agilent IO Library
Suite > Agilent Connection Expert). It will display the modules that are installed.
2. Check that the M9210A module is recognized.
3. Select the M9210A module and check that the correct Model Name appears in the Instrument Properties.
4. Select the 'Installed Software' tab and review the configuration data (as shown below).
5. You have the option of using either the older SFP 1.x or the newer SFP 5.x by selecting from the list and
clicking on the 'Start SFP' button. This will provide control of the module for self test and other operational
verification procedures.
14

Figure 4 - Agilent Connection Expert (ACE)

M9210A PXI-H 10-bit Digitizing Scope Startup Guide