Connecting Accessories; 10 Base-T Lan Connection Radiated Emissions - Agilent Technologies OmniBER 720 User Manual

SONET_Usr.bk Page 16 Wednesday, December 13, 2000 11:11 AM
Introduction

Connecting Accessories

Connecting Accessories

LID
Provides the output for the option 602 printer which is fitted in the cover (LID) of
the instrument.
VGA
Provides the output for a display monitor.
Printer
External printer connection details are given in Chapter 7 page 154 .
GPIB, RS232,
The port selected for external printer use is not available for remote control.
PARALLEL ONLY
Remote Control
Remote control connection is given in the Remote Control Manual.
GPIB, RS232,
The port selected for remote control use is not available for an external printer.
10 BASE -T

10 Base-T Lan Connection Radiated Emissions

To ensure compliance with EN 55011 (1991) a category 5, FTP patch lead, RJ45
cable should be used to connect the LAN port on the processor module marked
"10 Base-T".
16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com