Manual Changes
Introduction
This appendix contains the information required to adapt this manual to earlier versions or
congurations of the 4349B than the current printing date of this manual. The information in
this manual applies directly to the 4349B serial number prex listed on the title page of this
manual.
Manual Changes
To adapt this manual to your 4349B, see Table A-1 and Table A-2, and make all the manual
changes listed opposite your instrument's serial number and rmware version.
Instruments manufactured after the printing of this manual may be dierent from those
documented in this manual. Later instrument versions will be documented in a manual
changes supplement that will accompany the manual shipped with that instrument. If your
instrument's serial number or ROM version is not listed on the title page of this manual, in
Table A-1, or Table A-2, make changes according to the yellow MANUAL CHANGES supplement.
In additions to information on changes, the supplement may contain information for correcting
errors (Errata) in the manual. To keep this manual as current and accurate as possible,
Agilent Technologies recommends that you periodically request the latest MANUAL CHANGES
supplement.
For information concerning serial number prexes not listed on the title page or in the
MANUAL CHANGE supplement, contact the nearest Agilent Technologies oce.
To conrm the ROM version, turn ON the power for the 4349B or execute
external controller.
Serial Prex or Number
Version
1.01, 1.02, 1.03
Table A-1. Manual Changes by Serial Number
Table A-2. Manual Changes by ROM Version
1.00
Make Manual Changes
Make Manual Changes
Change 1, Change 2
Change 2
Manual Changes
A
on the
A-1