Performing Resistance Measurement And Continuity Test - Agilent Technologies U1211A Quick Start Manual

Performing Resistance Measurement and
Continuity Test
1 Set the rotary switch to Ω.
2 Connect the red and black test leads to input terminals Ω (red) and
COM (black) respectively.
3 Probe the test points (by shunting the resistor) and read the display.
4 To perform continuity test, press Shift once. The buzzer will sound
when the resistance is below 10.0 Ω.
Connect
Audible
continuity
Probe
and read
Quick Start Guide