Status Lights
Emulation Probe Target Status Lights
The emulation probe uses status lights to communicate various modes and
error conditions.
The following table gives more information about the meaning of the power
and target status lights.
❍ = LED is off
G = LED is on
Power/Target Status Lights
Pwr/Target
Meaning
LEDs
❍ RST
No target system power, or emulation probe is not
❍ DBG
connected to the target system
❍ RUN
G
RST
Target system is in a reset state
❍ DBG
❍ RUN
❍ RST
The target processor is in Debug Mode
G
DBG
❍ RUN
❍ RST
The target processor is executing user code
❍ DBG
G
RUN
❍ RST
Only boot firmware is good (other firmware has been
G
DBG
corrupted)
G
RUN
G
RST
The emulation probe can no longer control the target. Reset
G
DBG
the target, then initialize the emulation probe.
G
RUN
Emulation for the Motorola M•CORE
Troubleshooting the Emulation Probe
Status Lights
129