Instrument Controls; Display Screen; Keypad - Agilent Technologies 1290 Infinity II User Manual

Instrument Controls

The ELS Detector can be used as a standalone detector via the front
keypad and screen, as shown in
using software (e.g OpenLAB CDS ChemStation).

Display Screen

The graphical interface on the front of the instrument displays the current
method, status, evaporator temperature, nebuliser temperature, gas flow
and output of the instrument. Operating parameters can be altered via the
interactive menu bar at the bottom of the display.
Figure 7

Keypad

The four arrows on the front of the instrument are used to navigate
within the interactive menu bar. The AZ/Stop key has a dual function; it
can be used to auto zero the ELSD at any time, unless a timetable is
running. If the AZ/Stop key is pressed during an active timetable, the
timetable will stop running and the ELSD will revert to STANDBY mode.
Agilent 1290 Infinity II ELSD User Manual
ELSD display screen
Figure 7 on page 51 or via PC control
Using the Module

Instrument Controls

5
51