display rmon history
Use display rmon history to display RMON history control entries and history samples of Ethernet
statistics for Ethernet interfaces.
display rmon history [ interface-type interface-number ]
Predefined user roles
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
the command displays history samples for all interfaces that have an RMON history control entry.
RMON uses the etherHistoryTable object to store the history samples of Ethernet statistics for Ethernet
To collect history samples for an Ethernet interface, you must first create a history control entry on the
To configure the number of history samples that can be displayed and the history sampling interval, use
the rmon history command.
# Display the RMON history control entry and history samples for GigabitEthernet 3/0/1.
<Sysname> display rmon history GigabitEthernet 3/0/1
HistoryControlEntry 6 owned by user1 is VALID.
Sampling record 1 :
Time when an event record was created.
entry-number—Event record index (represented as logEventIndex.logIndex), which
uniquely identifies the record among all records for the event.
created-time—Time when the event entry was created (MIB object logTime).
Record description (MIB object logDescription).
: GigabitEthernet 3/0/1 <ifIndex.117>
: 8(sec) with 3 buckets max