Call Parking; Call Parking Process; Parking The Call Internally - Auerswald COMpact 5000 Operation Manual

Call Parking

Call parking lets a caller in a waiting position be transferred so that the desired communication
partner can accept the call on another internal telephone.

Call Parking Process

Call parking is carried out as follows:
• The call is first transferred to a phone number that has been previously specified for this
function and then parked.
• The caller is kept on hold in the PBX and listens to hold music.
• The desired communication partner is then notified of the waiting caller. He can then take
the call by dialling the phone number that had previously been transferred.

Parking the Call Internally

Requirements:
• Authorisation Call Parking assigned to the subscriber
• Configured base number
During an external call, proceed as follows:
1. Press the Flash key or the Query key.
2. Enter the internal base number. Possible entries:
Internal base number for the parking zone
Direct exchange line telephone: with preceding **)
3. Dial the number of the park position. Possible entries:
0 to 9
Note: If you hear a busy signal when you dial the park position, this position
is already in use. Pressing the Flash key (on DTMF telephones) or the
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Call Parking Process
(for exchange line request type
Functions
Call Parking
423