Siemens HiPath 3000 Series Service Documentation page 1115

Nur für den internen Gebrauch
Available functions
The following functions are available for IP networking:
Central attendant console
●
A specific system terminal (subscriber) can be configured as an attendant or intercept po-
sition. Any incoming call to the system will arrive here automatically if no subscriber can be
assigned to it, although the call may originally have come in on any one of the nodes con-
nected via IP networking.
The central attendant console can then forward these calls to the required subscriber.
Again it does not matter which node the station is logged on to.
Once the attendant queue reaches a predefined length, calls can be automatically forward-
ed to an overflow destination.
Cross-node busy signaling is available when using optiClient Attendant.
Virtual ports
●
Virtual ports are used for the signaling of statuses and calls on all systems. They are not
linked to physical terminal interfaces. The corresponding boards must not be inserted. Vir-
tual ports have their own internal and external phone numbers and can therefore be called.
They can be programmed for signaling on DSS keys and be added to call pickup groups.
DISA Internal (Direct Inward System Access Internal)
●
When using Internal DISA Intern (not to be confused with External DISA Extern) certain
features in a node can be activated by stations of a different node:
Release of the door opener using the relay option
●
Follow me
●
Relay on/off
●
Night service
●
Disconnecting from a hunt group/group call
●
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
HiPath 3000/5000 in the LAN Network
h3h5_in_the_lan.fm
HG 1500 Board
13-17