Chapter 4
| System Management Commands
System Status
show system
Example
Refer to the example for the running configuration file.
Related Commands
show running-config (94)
This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Example
Console#show system
System Description : ECS2100-28T
System OID String
: 1.3.6.1.4.1.259.10.1.43.104
System Information
System Up Time
System Name
System Location
System Contact
MAC Address (Unit 1)
Web Server
Web Server Port
Web Secure Server
Web Secure Server Port : 443
Telnet Server
Telnet Server Port
Jumbo Frame
Console#
Table 13: show system – display description
Parameter
System Description
System OID String
System Up Time
System Name
System Location
System Contact
MAC Address
Web Server/Port
Web Secure Server/Port
Telnet Server/Port
: 0 days, 2 hours, 25 minutes, and 27.66 seconds
:
:
:
: 00-E0-0C-00-00-FD
: Enabled
: 80
: Enabled
: Enabled
: 23
: Disabled
Description
Brief description of device type.
MIB II object ID for switch's network management subsystem.
Length of time the management agent has been up.
Name assigned to the switch system.
Specifies the system location.
Administrator responsible for the system.
MAC address assigned to this switch.
Shows administrative status of web server and UDP port number.
Shows administrative status of secure web server and UDP port
number.
Shows administrative status of Telnet server and TCP port number.
– 96 –