Show Mvr; Table 117: Show Mvr - Display Description - Edge-Core ECS4610-24F Management Manual

This command shows information about the global MVR configuration

show mvr

settings when entered without any keywords, the interfaces attached to
the MVR VLAN using the interface keyword, or the multicast groups
assigned to the MVR VLAN using the members keyword.
S
YNTAX
show mvr [interface [interface] | members [ip-address]]
interface
ip-address - IP address for an MVR multicast group.
(Range: 224.0.1.0 - 239.255.255.255)
D S
EFAULT
Displays global configuration settings for MVR when no keywords are used.
C M
OMMAND
Privileged Exec
C U
OMMAND
Enter this command without any keywords to display the global settings for
MVR. Use the interface keyword to display information about interfaces
attached to the MVR VLAN. Or use the members keyword to display
information about multicast groups assigned to the MVR VLAN.
E
XAMPLE
The following shows the global MVR settings:
Console#show mvr
MVR Config Status
MVR Running Status
MVR Multicast VLAN
MVR Group Address
MVR Group Count
Console#

Table 117: show mvr - display description

Field
MVR Config Status
MVR Running Status
MVR Multicast VLAN
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-24)
port-channel channel-id (Range: 1-32)
ETTING
ODE
SAGE
: Enabled
: Active
: 1
: 225.0.0.5
: 10
Description
Shows if MVR is globally enabled on the switch.
Indicates whether or not all necessary conditions in the MVR
environment are satisfied. (Running status is true as long as MVR
Status is enabled, and the specified MVR VLAN exists.)
Shows the VLAN used to transport all MVR multicast traffic.
– 935 –
| Multicast Filtering Commands
C 39
HAPTER
Multicast VLAN Registration